MF 6S

Award

Tractor de España 2024/25

Introducing the MF 6S

Continuing a new era for Straightforward and Dependable tractors

The new MF 6S continues the tradition launched with the iconic MF 8S, imposing itself as a straightforward and dependable tractor : operating your MF 6S you’ll experience amazing power, agility, engineered quality and distinctive style day after day.

Its new bonnet with the characteristic saber line will capture and hold your attention, accentuating its compact dimensions.

An extremely “nervous” and responding engine will allow you to blend all benefits of a four-cylinder machine with a pulling, pushing and lifting power to match a comparable six-cylinder tractor.

The result is a tractor that combines concentrated energy and power density, suiting perfectly the needs of those seeking a machine with reduced dimensions, yet with the carrying and power capacity at each end to lift and drive the very latest implements.

Key Benefits

Virtual Reality
Image Gallery

Straightforward and Dependable

Offering the performance of a larger, heavier six cylinder, but from a compact four cylinder , your versatile MF 6S is specifically designed to deliver the high performance to excel in a wide range of applications and to suit all users – from contractors and arable farms to large livestock operations.

Engine

All MF 6S tractors are powered by a nervous AGCO Power four cylinder, 4.9 litre, Stage V engine, which delivers maximum powers from 135hp to 200hp (with Engine Power Management) and up to 840Nm of torque on the largest model.

ALL-IN-ONE SCR TECHNOLOGY

These compact engines use the advanced and highly efficient All-In-One SCR Technology.

PERFORMANCE

Further improving performance and emissions control is the electronic wastegate on the turbocharger, while the automatic low idle engine speed also cuts fuel consumption.

After-Treatment Components

All the after-treatment components are located on the right side, below the cab, so there is no impact on visibility or cab access. This position maintains the good ground clearance and service access.

Airflow System

A new optimised airflow system improves engine cooling, which increases performance and boosts efficiency.

Engine Power Management (1)

The EPM gives up to a 20hp-plus power boost, plus extra torque. It is activated automatically in transport applications but can also be introduced in the field, in conjunction with hydraulics or PTO operation.

EPM Automatic Activation (2)

It is activated automatically in transport applications but can also be introduced in the field, in conjunction with hydraulics or PTO operation.

Dependable transmissions

MF 6S tractors can be specified with the format that fits your farm. Dyna-6 offers six clutchless shifts, in each of four ranges. Dyna-VT gives stepless shifting for the ultimate in convenience and control in all conditions.

Dyna-6

Delivering class-leading dynamic performance and reliability, the semi-powershift transmission consists of six Dynashift ratios, optimally stepped in four ranges and changed without recourse to the clutch pedal.

Unique, simple, multi-function Power Control

The unique MF Power Control lever provides a PowerShuttle feature, as well as an alternative method of transmission ratio changing and a de-clutch function. Shuttle response can be adjusted according to operator preference.

MULTIPAD - CONTROL AT THE PALM OF YOUR HAND

As standard on Efficient and Exclusive, the Multipad lever operates the transmission as well as controlling cruise control, the rear linkage, PTO, headland management, spool valves through the integrated mini-joystick.

Automatic mode

Automatic Mode taking automatic care of up and downshifting to maximise versatility and output. Response point is adjustable according to desired engine rpm parameters

Brake to Neutral

Brake to Neutral switch simultaneously operates the clutch as soon as the brake pedal is pressed. This eases the load on the operator, while increasing efficiency and convenience and is particularly useful for loader operations.

SUPERCREEP

Close control in specialist low-speed tasks is assured with additional supercreep gears, enabling forward speeds as low as 100m/hr to be achieved. 0,09 kph@1400 tr/mn

ECO as standard

Automatic mode also delivers a cost benefit: the standard SuperEco feature ensures that maximum speed is achieved at a very low engine speed, so reducing fuel consumption. (40 km/h @ 1500 rpm, 50 hm/h @ 1800 rpm, depending on tyres).

Proven Dyna-VT transmission

Working in harmony with EPM, Dyna-VT offers infinitely variable speeds, choice of operating modes and simple electronic programming for class-leading performance, efficiency and economy.

The MF 6S has been designed to offer upgraded capabilities that were previously the domain of six-cylinder tractors, to easily handle heavy-duty applications with outstanding lift and drive capabilities for the very latest implements. It is a tractor which is both lightweight and powerful, is full of torque yet remains nimble. This is pure concentrated energy and power density. Perfect if you are looking for a machine with compact dimensions plus unbeatable power take-off and linkage equipment for outstanding operation and performance working the most demanding and advanced implements.

HIGH CAPACITY REAR LINKAGE

It offers a capacity of up to 9,600 kg. Rear couplers are equipped with an hydraulic decompression system for easy uncoupling of implements and a total of up to five spool valves are available.

HIGH CAPACITY REAR LINKAGE (2)

Automatic stabiliser installation has a short chain for the simplest installation. A one way stabiliser each side offers extra reliability.

Electronic Linkage Control System

ELC, as standard, provides precise and responsive control of linkage functions ensuring accurate management of working depth for soil engaging implements plus working height for other implements.

Electronic Linkage Control System (2)

It brings more responsiveness and accuracy because the electrics operate immediately – this means that the draft reacts accurately to ensure maximum traction at all times to minimise wheel slip and fuel consumption.

Hydraulic flow on Dyna-6

The MF 6S tractors with Dyna-6 transmission are available with a 110 litres/min load sensing system as standard. You can also choose to equip your MF 6S with an optional open centre hydraulics offering 100 litres/min.

Hydraulic flow on Dyna-VT

For a faster hydraulic response, Dyna-VT models (as standard with a closed centre load sensing system offering 110 l/mn) can be equipped with a 190 l/mn load sensing system capable of handling the most demanding implements.

Optional 190 l/mn load sensing system on Dyna-VT

It uses a variable displacement swash plate pump. High flow at low engine speeds ensures high output with economy, as the variable flow pump supplies oil on demand, while full output of the pump is put into action when required.

Auxiliary spool valves

A wide choice of spool valves and control options help you make the most of using modern implements as well as ease operation. Depending on your tractor’s specification, you’ll find up to five spool valves to meet all your requirements.

Essential Models

There’s straightforward mechanical control of the spool valves on Essential versions, with the addition of a comfortable dedicated joystick option for precise loader control.

Efficient Models

In Efficient models Multipad with micro Joystick for the 1st & 2nd spool valves, works with mechanically operated levers for the 3rd & 4th spool valves. An armrest-mounted electronic joystick option provides further comfort.

Exclusive Models

Exclusive version operators benefit from a new Multipad with micro joystick and two fingertips on console.

Front linkage (1)

A heavy duty Integrated Front Linkage System (IFLS) is available as an option and is designed to match the front suspension.

IFLS (2)

Offering up to 3,2T lift with dedicated front valve control, it features up to 2 spool valves and a free return line. The control of the linkage and the hydraulic lines are fully independent enhancing productivity and comfort.

A wide choice of PTO options

Up to 4 PTO speeds available as an option: 540, 540 ECO, 1000 or 1000 ECO. As standard the MF 6S are equipped with 2 PTO speeds at 2,000 rpm, where maximum power is achieved.

Constant power band

With the benefit of a ‘constant power’ band of up to 600rpm and the ability with Dyna-VT to precisely select any ground speed at the chosen engine speed, you can always achieve a perfect match of PTO speed, forward speed and power – with optimum economy.

Improve fuel economy

For lighter duty work, ‘540 Eco’ or ‘1000 Eco’ PTO speed is achieved at around 1550 engine rpm, further improving fuel economy and helping to reduce in-cab noise levels.

The MF 6S curved chassis and new bonnet smart design helps these tractors turn as tight as anything on the market. Chassis design is such that the tractor handles well on the road, and has perfect weight distribution for excellent traction yet minimal soil impact in the field in all applications.

Turning Circle

Whether in the field or around the yard, the turning circle benefits of the short wheelbase and curved front frame design that MF engineers have incorporated into the new MF 6S soon becomes apparent.

Faster headland turns, quicker loader work

Even on tractors specified with a front linkage, the turning circle is not compromised. MF 6S tractors can turn in a circle just 9.5m in diameter. That means faster headland turns, quicker loader work and a more productive man and machine.

Speedsteer (1)

SpeedSteer simplifies headland turning and maximises productivity in the field and loader operations. This useful option allows operators to adjust the steering ratio to reduce the number of steering wheel revolutions required to make turns.

Speedsteer (2)

The system can be switched on or off, automatically disengages at speeds above 18 km/h, ensuring safe operations at high speed in the field and on the road.

Front axle suspension (1)

Improved comfort and safety is delivered by an innovative front suspension option: the Quadlink relies on hydraulic accumulators acting on the front axle to dampen ride over rough roads and fields.

Quadlink suspension system (2)

It provides 90mm of suspension travel and an automatic control system ensures equal suspension movement in both compression and extension.

More comfort and safety with Quadlink suspension system (3)

Its simple design produces superior ride comfort, turning angle and offers the full angle of oscillation as well as maximising ground clearance, remaining completely maintenance-free.

Chassis (1)

Massey Ferguson designers have sought to provide MF 6S tractors with the perfect chassis size for the wide range of tasks of which they are capable. That means better handling off road and on, during field tasks and haulage.

Compact chassis (2)

With 400 kg less compared to its six-cylinder equivalent, it means higher payload in transport and minimum impact on your land to increase your yields ensuring minimum ground pressure and soil damage when working on the land.

Long wheelbase

Its long wheelbase (2.67m) and the perfect power-to-weight ratio (45% front and 55% rear) ensure the best traction and stability on the 4 cylinders market, offering also excellent manoeuvrability when making headland turns.

IMPRESSIVE GROSS VEHICLE WEIGHT

With an increased gross vehicle weight up to 12,500kg, the MF 6S series also have the power to excel in heavier draft operations, with the addition of smart monobloc ballast boosting traction.

Wide choice of tyres and ballasts

The wide choice of tyre dimensions and ballasts available for the MF 6S offers improved traction and low soil compaction for keener operating costs and higher crop yields.

Optional 42" rear tyres

Superb ground traction is ensured by the Michelin VF650/60R42 rear tyres, available on MF 6S.165 and MF 6S.180 as an option. They guarantee maximum power to the ground with minimum soil compaction thanks to the big footprint.

The MF 6S cab has been renowned for excellence, so you can sit in a very productive environment that blends comfort, quietness (with only 70dB), ease of use and quality. Because we know that a more productive operator is an operator who creates profit for his business!

Ergonomics

Large doors and wide steps offer easy access to the MF 6S cab. Here you will find all operating information on the comprehensive dashboard. Ease of use is guaranteed with switches and controls falling easily to hand.

New armrest

The new armrest offers a blend of simplicity and ease of use, with all main functions ergonomically grouped. Here you will also find quick and convenient controls for other items such as Bluetooth phone and radio.

360° visibility

Work smarter with implements and drive safely on the roads with 360° cab visibility.

Top class comfort

Be more productive with during a long day with the MF ‘Quadlink’ suspended front axle, the mechanical active cab suspension option and a choice of seat specification.

Extensive range of output

Other features include automatic beacon activation on the road and a ‘return home’ function, which automatically switches off the worklights and has a comfort cab light delay so you can safely leave.

Makes your working life easier

There’s also extra sockets for mobile phones or laptop, radio and MP3 player (USB, Aux and CD), Bluetooth connection, DAB + digital radio, telescopic side mirrors and electric de-icing, plus automatic air conditioning.

Turn night into day

The addition of the option of up to 16 LED working lights provides outstandingly bright illumination.

ADVANCED DASHBOARD WITH PERFORMANCE MONITOR

Operators will appreciate the slim dashboard, which clearly displays operating data on its 70mm x 52mm, colour ‘Set up and Information Screen’.

Roof types

A choice of 3 roof types allows to offer improved visibility for all applications or to increase natural ventilation. Choose between Standard roof, Standard roof with hatch & Visio roof.

BETTER BY DESIGN

With the introduction of the MF 6S, Massey Ferguson continues its striking new era design first seen on the advanced, new MF 8S Series, following the same striking ‘neo-retro’ livery with modern headlights and LED signature.

Heritage

This design pays tribute to the brand’s heritage, incorporating an interpretation of the iconic MF grey sabre stripe on the side and horse head collar motif on the bonnet, which dates back to the MF 100 series.

The cabs on the MF 6S provide an environment designed specifically to counter stress and fatigue by providing unparalleled comfort, simplicity and visibility. Features such as automatic beacon activation and comfort light delayed switch-off are a welcome addition. New front axle suspension further improves comfort. New, intuitive Datatronic 5 console delivers the information you need to manage and control all tractor’s functions. New armrest and perfect ergonomics mean all controls fall easily to hand for effortless operation. Outside, up to 16 LED lights turn night into day with outstanding brilliance and very low energy consumption. The LED package is also visibly striking during daylight hours, as their design enhances the tractor‘s external appearance.

Essential Specification

Essential is the base specification for the MF 6S Series, but it is anything but basic. It provides all the key elements you would expect from MF, with a blend of simplicity, ease of use and versatility to fit the needs that require power and performance.

Essential Panoramic cab

The Essential Panoramic cab option provides ultimate, all-round visibility for maintenance operations. The wide, one-piece polycarbonate screen is extremely tough and protects operators from flying debris.

Efficient specification

Equipped with key, productivity enhancing features, the Efficient package helps you to work faster, to a higher standard and with more accuracy.

Exclusive specification

Exclusive tractors, equipped with many advanced features, are designed for more intensive, larger-scale operations seeking cost-effective benefits for the business.

A range of technology in the MF 6S helps you manage your operations and business more effectively and efficiency. More than ever before, modern progressive farmers are relying on data and information to keep vital records, improve efficiency and productivity to increase yields, reduce costs and increase returns. Massey Ferguson’s straightforward, dependable and intuitive technology is easy to use helping owners and operators to operate equipment more effectively, analyse operations and make informed decisions to increase profits.

Datatronic 5 - Standard on Exclusive

The Datatronic 5 system literally puts all the functions of the MF 6S tractor at the operator’s fingertips via its smart 9in touch-screen.

Datatronic 5 - Standard on Exclusive, Optional on others

The Datatronic 5 system literally puts all the functions of the MF 5S tractor at the operator’s fingertips via its smart 9in touch-screen.

Fieldstar 5

The new Fieldstar 5 terminal is designed in order to create a more intuitive Precision Farming experience, providing a system that delivers a straightforward an easy to use experience, improving efficiency, productivity and profitability.

MF Guide

MF Guide is MF’s full featured, hands free steering system, available on new tractors or as an after-market installation. It is capable of delivering sub-metre, decimetre and centimetre accuracy, increasing the efficiency of your farming.

MF Section Control

With the fully automatic Section Control for ISOBUS implements, operators can apply seeds, fertilizer or Crop protection products without overlapping. This prevents double treatment and areas worked outside of the field edges.

MF Task Doc

The MF Task Doc system has a real place in the future of agriculture, helping farmers to become more productive through the knowledge brought by putting precision-measured data at the business owner’s fingertips.

MF Connect

MF Connect service enables you — and your dealer — to coordinate, optimize and seamlessly connect your fleet, to better manage maintenance and remotely monitor equipment in the field.

Dyna-VT Highlights:

0.03 to 40 km/h or 50 km/h*
40 km/h super Eco or 50km/h* Eco with Dynamic Tractor Management (DTM)
The choice of two speed ranges optimise torque for different applications
Lever, pedal or automatic control
Engine Power Management now available to give extra power when needed
‘Supervisor’ maximises the output under varying loads
Dynamic Tractor Management (DTM) maintains the set travel speed by automatically adjusting the power (engine speed) according to load
Active Stop
Shuttle aggressiveness adjustment
Pedal aggressiveness adjustment
Switch between cruise speeds (C1 and C2)
Brake pedal to neutral feature

_{*Depending on market legislation}

Four-wheel drive and differential lock

Automated functions on the differential lock and 4WD systems include:

Automatic disengagement of 4WD and differential lock above 14km/h
Automatic differential lock disengagement when a rear linkage-mounted implement is raised (and re-engagement when lowered)
Automatic differential lock disengagement when either one or both of the brake pedals are pressed (and re-engagement when released)
Automatic 4WD engagement when both brake pedals are depressed, when the differential lock is engaged or the handbrake applied
Automatic diff lock activation linked to wheels turning angle, depending on version

Operator Environment - Package Specifications

	Essential	Essential Panoramic	Efficient	Exclusive
Information about the different packages	Essential is the entry-level MF 6S Series, but it still is still equipped with high standard specification. It includes all the key elements you would expect from your tractor, with a blend of simplicity, automation and ease of use to suit a wide range of applications and operations.	The MF 6S Series Panoramic cab offers unobstructed visibility to the right hand side for safe and efficient operation of side-mounted equipment. The wide, one-piece polycarbonate screen is extremely tough and protects operators from flying debris. A special anti-scratch coating and dedicated wash/wipe system maintains great visibility in all conditions. For local authority and highway maintenance operations the cab can be equipped with fixing brackets and wiring for hazard warning lights and signs.This cab option will allow a farmer/contractor to diversify his business into intensive roadside maintenance and/or contracting for local authorities.	Efficient is the medium specification package for the MF 6S Series, developed to help you work smarter and in more comfort. Dedicated to delivering increased efficiency thanks to its key features, the Efficient package enables you to work faster, to a higher standard, with more accuracy, together with high levels of comfort, ergonomics and reliability. Stay in control of the most technologically advanced and demanding implements to take advantage of their increased productivity.	Exclusive is a combination of high-spec versatility and refinement dedicated to operators looking for a tractor with advanced features and functions in terms of ergonomics, comfort, automation, Smart Farming capacities and full connectivity.This version is aimed at more intensive, large scale operators looking for more advanced features that will ensure cost-effective benefits for their business. The Exclusive armrest comes with numerous benefits including comfort and convenience when operating multiple, frequently-used controls.Exclusive also adds the Datatronic 5 as standard. Use the 9” touchscreen terminal to manage tractor functions, ISOBUS capability to simplify implement operations and use of MF Smart Farming solutions.Using the Exclusive package, operate the most technologically advanced and demanding implements with the optimum efficiency to take advantage of their increased productivity.
Standard Features	Air conditioning with manual adjustment Telescopic, wide-angle wing mirrors Radio, aerial and speakers Standard air-suspended seat Control Centre with T-lever transmission control Dyna-6 Super-Eco - 40km/h with standard Automatic mode Brake-to-neutral disengages drive with braking Mechanical control of spool valves Engine speed memory		Front axle suspension Mechanical cab suspension Air Conditioning with manual adjustment Telescopic, wide-angle wing mirrors Seat-mounted armrest with Multipad controller Radio/ CD / MP3 Front Aux-in / Blue-tooth with microphone and controls in armrest Automatic air-suspended seat 2 USB ports Dyna-6 Super-Eco with Automatic mode or Dyna-VT 40km/h Eco transmissions Cruise control and Brake-to-Neutral 110 litre/min closed-centre load sensing hydraulics Electrical and mechanical spool valves Engine speed memory	QuadLink front axle suspension (with 50kph only) Mechanical active cab suspension Automatic Air Conditioning Mirrors with electric de-icing and adjustment Radio/ CD / MP3 Front Aux-in / Bluetooth with microphone and controls in armrest Automatic air suspended, swivel seat, with longitudinal shock absorber and pneumatic lumbar All controls in the ergonomic armrest with Multipad lever 4 electrical spool valves with electrical joystick and fingertips Dyna-6 Super Eco with Automatic Mode or Dyna-VT 40km/h Eco transmission Cruise control and Brake-to-Neutral Closed-centre load-sensing 110 litre/min hydraulics Datatronic 5 9" touchscreen MF Task Doc recording all jobs’ data ISOBUS
Optional features	Mechanical cab suspension Front axle suspension Panoramic cab with polycarbonate right-hand side window Automatic air-suspended seat Integrated Front Linkage System and PTO 1,000rpm Eco rear PTO Dyna-6 50 km/h* Super-Eco trans-mission with Super Creeper (option) Loader-ready from factory with Multifunction mechanical joystick Closed-centre load-sensing hydraulics Fieldstar 5 terminal ISOBUS MF Guide system with Advanced guidelines MF Section & Rate Control MF Task Doc & Task Doc Pro record-ing all job's data exchange MF Connect Telemetry		Mechanical active cab suspension Automatic Air Conditioning 16 LED working Lights SpeedSteer Heated, electric adjust mirrors Automatic air suspended, swivel seat, with lateral suspension Integrated Front Linkage System and PTO Loader-ready from factory with Multifunction joystick 110 litre/min closed-centre load sensing hydraulics Dyna-6 50 km/h* Super-Eco transmission with Super Creeper (option) or Dyna-VT 50 kph Super-Eco Datatronic 5 9" touchscreen with new interface for radio, phone and all tractor functions & technology Fieldstar 5 terminal ISOBUS MF Guide system with Advanced guidelines MF Section & Rate Control MF Task Doc & Task Doc Pro recording all job's data exchange MF Connect Telemetry	Automatic air suspended, swivel seat, with lateral suspension 1,000 rpm front PTO Up to 8 electrical spool valves fully configurable and customizable on the Exclusive armrest 16 LED working Lights SpeedSteer Integrated Front Linkage System with independ-ent valve Loader ready from factory with electric Multi-function joystick Dyna-6 50 km/h* Super-Eco transmis sion with Super Creeper (option) or Dyna-VT 50 kph Super-Eco MF Guide system with Advanced guidelines MF Section & Rate Control MF Task Doc & Task Doc Pro record-ing all job's data exchange Fieldstar 5 terminal MF Connect telemetry * Depending on market/legislation

Essential

Essential Panoramic

Efficient

Exclusive

Information about

the different packages

Essential is the entry-level MF 6S Series, but it still is still equipped with high standard specification. It includes all the key elements you would expect from your tractor, with a blend of simplicity, automation and ease of use to suit a wide range of applications and operations.

The MF 6S Series Panoramic cab offers unobstructed visibility to the right hand side for safe and efficient operation of side-mounted equipment. The wide, one-piece polycarbonate screen is extremely tough and protects operators from flying debris. A special anti-scratch coating and dedicated wash/wipe system maintains great visibility in all conditions. For local authority and highway maintenance operations the cab can be equipped with fixing brackets and wiring for hazard warning lights and signs.This cab option will allow a farmer/contractor to diversify his business into intensive roadside maintenance and/or contracting for local authorities.

Efficient is the medium specification package for the MF 6S Series, developed to help you work smarter and in more comfort. Dedicated to delivering increased efficiency thanks to its key features, the Efficient package enables you to work faster, to a higher standard, with more accuracy, together with high levels of comfort, ergonomics and reliability. Stay in control of the most technologically advanced and demanding implements to take advantage of their increased productivity.

Exclusive is a combination of high-spec versatility and refinement dedicated to operators looking for a tractor with advanced features and functions in terms of ergonomics, comfort, automation, Smart Farming capacities and full connectivity.This version is aimed at more intensive, large scale operators looking for more advanced features that will ensure cost-effective benefits for their business. The Exclusive armrest comes with numerous benefits including comfort and convenience when operating multiple, frequently-used controls.Exclusive also adds the Datatronic 5 as standard. Use the 9” touchscreen terminal to manage tractor functions, ISOBUS capability to simplify implement operations and use of MF Smart Farming solutions.Using the Exclusive package, operate the most technologically advanced and demanding implements with the optimum efficiency to take advantage of their increased productivity.

Standard Features

Air conditioning with manual adjustment

Telescopic, wide-angle wing mirrors

Radio, aerial and speakers

Standard air-suspended seat

Control Centre with T-lever transmission control

Dyna-6 Super-Eco - 40km/h with standard Automatic mode

Brake-to-neutral disengages drive with braking

Mechanical control of spool valves

Engine speed memory

Front axle suspension

Mechanical cab suspension

Air Conditioning with manual adjustment

Telescopic, wide-angle wing mirrors

Seat-mounted armrest with Multipad controller

Radio/ CD / MP3 Front Aux-in / Blue-tooth with microphone and controls in armrest

Automatic air-suspended seat

2 USB ports

Dyna-6 Super-Eco with Automatic mode or Dyna-VT 40km/h Eco transmissions

Cruise control and Brake-to-Neutral

110 litre/min closed-centre load sensing hydraulics

Electrical and mechanical spool valves

Engine speed memory

QuadLink front axle suspension (with 50kph only)

Mechanical active cab suspension

Automatic Air Conditioning

Mirrors with electric de-icing and adjustment

Radio/ CD / MP3 Front Aux-in / Bluetooth with microphone and controls in armrest

Automatic air suspended, swivel seat, with longitudinal shock absorber and pneumatic lumbar

All controls in the ergonomic armrest with Multipad lever

4 electrical spool valves with electrical joystick and fingertips

Dyna-6 Super Eco with Automatic Mode or Dyna-VT 40km/h Eco transmission

Cruise control and Brake-to-Neutral

Closed-centre load-sensing 110 litre/min hydraulics

Datatronic 5 9" touchscreen

MF Task Doc recording all jobs’ data

ISOBUS

Optional features

Mechanical cab suspension

Front axle suspension

Panoramic cab with polycarbonate right-hand side window

Automatic air-suspended seat

Integrated Front Linkage System and PTO

1,000rpm Eco rear PTO

Dyna-6 50 km/h* Super-Eco trans-mission with Super Creeper (option)

Loader-ready from factory with Multifunction mechanical joystick

Closed-centre load-sensing hydraulics

Fieldstar 5 terminal

ISOBUS

MF Guide system with Advanced guidelines

MF Section & Rate Control

MF Task Doc & Task Doc Pro record-ing all job's data exchange

MF Connect Telemetry

Mechanical active cab suspension

Automatic Air Conditioning

16 LED working Lights

SpeedSteer

Heated, electric adjust mirrors

Automatic air suspended, swivel seat, with lateral suspension

Integrated Front Linkage System and PTO

Loader-ready from factory with Multifunction joystick

110 litre/min closed-centre load sensing hydraulics

Dyna-6 50 km/h* Super-Eco transmission with Super Creeper (option) or Dyna-VT 50 kph Super-Eco

Datatronic 5 9" touchscreen with new interface for radio, phone and all tractor functions & technology

Fieldstar 5 terminal

ISOBUS

MF Guide system with Advanced guidelines

MF Section & Rate Control

MF Task Doc & Task Doc Pro recording all job's data exchange

MF Connect Telemetry

Automatic air suspended, swivel seat, with lateral suspension

1,000 rpm front PTO

Up to 8 electrical spool valves fully configurable and customizable on the Exclusive armrest

16 LED working Lights

SpeedSteer

Integrated Front Linkage System with independ-ent valve

Loader ready from factory with electric Multi-function joystick

Dyna-6 50 km/h* Super-Eco transmis sion with Super Creeper (option) or Dyna-VT 50 kph Super-Eco

MF Guide system with Advanced guidelines

MF Section & Rate Control

MF Task Doc & Task Doc Pro record-ing all job's data exchange

Fieldstar 5 terminal

MF Connect telemetry

* Depending on market/legislation

^{* Depending on market/legislation}

Tractor-Loader

When you purchase a new MF 6S tractor, whether you have ordered it as the Essential, Efficient or Exclusive specification, it can have a fully integrated loader now available from factory to deliver ultimate performance. Designed for maximum manoeuvrability and maintenance access, it forms a perfect combination being an integral part of the machine. In total control - The optional mechanical or E/H multifunction joystick has additional transmission functions such as forward/reverse and speed change for added versatility during operation. The 3rd Live enables the operator to open/close a grab and tip or crowd an implement at the same time. You will enjoy superb visibility thanks to the new slim bonnet and exaust pipe. The optional Visioline roof improves vision of loads at height, and is particularly useful when stacking bales, for example. The ‘clutch effect’ puts the transmission into neutral when the brake pedals are depressed, allowing single-foot brake and clutch operation and making loader operation safer, easier and a lot more comfortable.

Tractor-Loader Highlights:

A flexible range for a wide variety of applications
Optional multifunction joystick comes with forward/reverse and speed change for added versatility
3rd live with proportional command - A clever addition to the loader hydraulic control that enables the operator to open/close a grab and tip or crowd an implement at the same time
Highest visibility thanks to the smart profiled design of the bonnet and the dashboard
Factory fitted loader subframe for optimum performance of your all-purpose tractor
Optimum manoeuvrability and access to maintenance operation
Optional Visioline roof with Falling Object Protection (FOPS)
Excellent manoeuvrability including tight turning angles, SpeedSteer and rapid response from engine and hydraulics
New Shake function can be activated on the multifunction joystick
New quick coupling system reduces pressure losses at high flows, quicker loader movement and savings on fuel
Optional hydraulic implement locking on the multifunction joystick
Through the SIS menu, the Engine Speed Automation (as standard) allows to increase the engine speed according to the action on the joystick
New MF E-Loader auto-control function, helps to increase loading accuracy, productivity and safety. Easily operated through the Datatronic 5 t ouch-screen, it enables operators to weigh individual fork or buck et loads. It also records the total weights of each item, load or job and these can be transferred as a simple spreadsheet. Using MF E-Loader, operators can also set-up and save automatic sequences for different loading cycles – including stopping the movement at pre-set upper and lower lift limits as well as setting maximum angles for the implement. It also provides a useful bucket shake facility.

Available Models

Model	Max Power* _(hp)	Max Power - EPM**_(hp)	Engine	Transmission	Max Torque***_(Nm)	Lift Capacity _(kg)
MF 6S.135	135	150	AGCO Power 4.9L, 4-Cylinder	Dyna-6, Dyna-VT	650	9,600
MF 6S.145	145	160	AGCO Power 4.9L, 4-Cylinder	Dyna-6, Dyna-VT	700	9,600
MF 6S.155	155	175	AGCO Power 4.9L, 4-Cylinder	Dyna-6, Dyna-VT	750	9,600
MF 6S.165	165	185	AGCO Power 4.9L, 4-Cylinder	Dyna-6, Dyna-VT	800	9,600
MF 6S.180	180	200	AGCO Power 4.9L, 4-Cylinder	Dyna-6, Dyna-VT	840	9,600
@1,950 rpm \| * with EPM \| ***@ 1,500 rpm with EPM

YOUR COURTESY FLEET

- BEST-IN-CLASS CUSTOMER SUPPORT
- MAXIMUM EFFICIENCY
- TOTAL TRUST

THE ULTIMATE PROOF OF DEPENDABILITY

Available through participating MF Dealers, MF Always Running provides a temporary replacement machine to ensure owners can continue working with minimum interruption, maximising uptime while their tractors, round balers or telehandlers are being serviced or repaired.

Find out more

Straightforward and dependable service

The MF Always Running courtesy fleet include tractors, balers and telehandlers, which are selected by dealers to cover the widest needs in its local area.

Following the series, the tractors can come equipped with front linkage with spool valves.

Livestock/ dairy/ mixed 85hp-145hp sector	Mixed farm 140hp-180hp sector	Arable farm 150hp-210hp	Arable/ contractor 200hp-305hp sector	Arable/ contractor 320hp-425hp sector (Dyna-VT)
MF 4710 M, 100hp	MF 6S.180, 180hp	MF 7S.180, 180hp	MF 8S.265, 265hp	MF 9S.425, 425hp
MF 5711 M, 115hp	MF RB 4160V	MF 7S.210, 210hp	MF 8S.305, 305hp	MF RB 4160V
MF 5S.145, 145hp	MF TH.7038	MF RB 4160V	MF RB 4160V	MF TH.7038
MF RB 4160V		MF TH.7038	MF TH.7038
MF TH.7038

_{* Please contact your local Massey Ferguson Dealer to check availability in your area. Terms and conditions apply that might vary according the market or country.}