The Central Tyre Inflation System option quickly adjusts pressures to the optimum settings to help increase traction and reduce compaction, taking just four minutes to set up pressures in typical VF 710/75R42 + VF 620/75R30 tyres from 0.8 bar to 1.6 bar.

The Central Tyre Inflation System is proven to reduce fuel consumption by 10% to 15%, as well as cut compaction by providing up to a 150% larger footprint. At the same time it can increase traction and reduce unnecessary tyre wear.

Excellent manoeuvrability is ensured thanks to the sculpted chassis and bonnet design, which enables the strong, suspended front axle to provide a tight turning radius of just 5.75 m (depending on tyre choice).

Speedsteer reduces operator effort and provides faster turns to boost productivity. It enables the operator to adjust the steering ratio and reduce the number of turns of the steering wheel required for a given amount of steering angle turns.

New ballasting options, including the ability to fit up to four wheel weights on each side, can increase the total weight to 18.5 t. This flexibility allows operators to select the right amount of ballast to exactly suit the job.

A 3.1 m long wheelbase provides superb stability helping to maintain high levels of traction in the field, while requiring less ballast for balance and providing greater comfort for transport work.

A new, stronger suspended front axle offers exceptional stability for road work and for operating mounted equipment at speed. It also provides greater traction, comfort and safety for the driver, which increases productivity.

All models can be equipped with a wide choice of factory-fitted tyre types and sizes, which now goes up to the 2.18 m diameter VF 750/70R44 for optimum field traction and less soil compaction.

MF 9S Series benefit from Massey Ferguson’s experience in designing dependable tractors. It’s in our expertise to deliver versatility, which comes from combining a strong, long wheelbase with a powerful tractor and tight turning radius.

Externally, the MF 9S striking neo-retro design reflects former models, while internally it advances our years of expertise in electronic controls, high performance and straightforward, dependable operation.

The Protect-U design with its exclusive 18 cm gap provides unrivalled operator comfort by isolating the engine from the cab, which reduces vibrations and noise to just 69dBA – making the spacious cab one of the quietest workplaces on the market.

The spacious 3.4 m3 cab offers a 360° all-round view and best-in-class visibility. Well placed and easy to use controls enhance operations and convenience.

The MF 9S is equipped to Massey Ferguson’s highest Exclusive specification as standard. This provides advanced features and functions to improve comfort and ease of use, combined with optimum automation, smart farming capacities and full connectivity.

Semi-leather automatic air suspended swivel seat, ventilated, two levels of heating, lateral damping, dual motion backrest and Dynamic Damping System. For even further comfort, a full leather seat is also available from MF By You.

The new control centre armrest fitted with the latest easy-to-use MultiPad lever provides complete fingertip control. This ISOBUS compatible lever operates all the tractor functions and includes an integral micro-joystick to control two spool valves.

Electrically adjustable and de-icing mirrors are fitted as standard. These come with adjustable top and lower sections to reduce blind spots. To further improve visibility and safety is an optional electric telescopic extension.

Straightforward Quadlink front suspension, with new management system, increases comfort and safety on the road as well as traction in the field, while maintaining manoeuvrability with a tight, 5.75 m turning radius.

Up to four sun blinds, along with the sloping front windscreen and roof overhang, provide shade for total protection.

Employing technology designed for the automotive industry, MF 9S tractor cabs are equipped with standard active mechanical cab suspension. Adjustable in three modes, it increases comfort and protects operators.

Up to 27 LED lights – 8 on the bonnet plus up to 19 on the cab – help keep you to productively carry on working after dark. Comfort light delay leaves the worklights on, after turning off, so you can leave safely.

As well as the standard rear-facing camera, a further three can be added to provide an all-round view of the implement as well as the road ahead and behind. Images are displayed on the terminals.

Efficient automatic air-conditioning provides perfect air distribution through 14 automotive-style outlets located all around the operator with automatic management via the Datatronic 5 terminal along with easily accessible armrest controls.

A ventilated storage compartment, located underneath the passenger seat, will keep your food and drinks fresh and cool during long working days.

An uprated Eco, closed-centre hydraulic system delivers 205 litres/min at just 1,650 rpm, which helps save fuel and cut noise levels. An electrical joystick provides fingertip control of three spool valves with decompression levers.

To meet the hydraulic demands of modern, complex implements is a new dual, closed-centre pump option. This generates 340 litre/min at 1,650 rpm, and is available with up to nine fully configurable and customisable spool valves.

To further enhance productivity is the 5 t capacity front linkage, with a choice of one or two spool valves with a free return along with an ISOBUS socket and control panel. This is also available with the option of a PTO.

Standard 540 Eco /1,000, with the option of 1,000/1,000 Eco. Speeds are achieved at low engine rpm, to improve fuel economy and help to reduce in-cab noise levels.

Ultimate Draft Control provides precise operation of the 12 t lift capacity heavy duty rear linkage offering accurate depth settings and better ground contour following. A new top link option with a 120 mm diameter ram increases lift capacity to 20 t.

Excellent 18 t Gross Vehicle Weight at 40 km/h or 16 t at 50 km/h* as well as an impressive Gross Combination Weight Ratio up to 50 t*, which help to boost productivity in the field and on the road. (*depending on market)

With 1000 rpm it powers a wide range of implement combinations to increase productivity and improve efficiency.

Closed centre load sensing system comes with power beyond facility with extra flow and return pipes to providing additional flow directly from the pump. This provides 101 litres of exportable flow to increase capacity.

With the fully automatic MF Section Control for ISOBUS implements, operators can apply seeds, fertilizer or crop protection products without overlapping. This prevents double treatment and areas worked outside of the field edges.

The MF Task Doc system has a real place in the future of agriculture, helping farmers to become more productive through the knowledge brought by putting precision-measured data at the business owner’s fingertips.

MF Guide is MF’s full featured, hands free steering system, available on new tractors or as an after-market installation. It is capable of delivering sub-metre, decimetre and centimetre accuracy, increasing the efficiency of your farming.

The Datatronic 5, touch-screen terminal, does not only manage the tractor functions, but it allows a complete control of all ISOBUS compatible implements. It also give access to the radio functions, permit to receive and make calls, and other functions.

With the optional Fieldstar 5 terminal, you can double your screen and manage all the relevant MF Technologies. It also allows you to simultaneously display your ISOBUS screen and guidance, for example.

The MF vDisplay digital dashboard shows all the tractor information at a glance. Easy to read and with intuitive operation, its clear display can be personalised and changed by simply scrolling through settings with a rotary knob by the steering wheel.

MF AutoTurn automates the headland turn, automatically steering the tractor the  next wayline. Operators can choose from three different steering modes to suit the implements being used and the type of work.

AutoHeadland delivers completely hands-free headland turns. Using the GPS position from MF Guide, the system automatically operates all the functions required to carry out the headland management sequence when exiting one pass and entering the next.

MF Connect Telemetry, provided as standard with a five-year subscription, enables you – and your dealer – to coordinate and seamlessly connect your fleet, to better manage maintenance, remotely monitor equipment in the field and optmise decision-making.

ISOBUS enables an implement manufacturer’s control system to be displayed on the Datatronic 5 or Fieldstar 5 terminals, saving owners and operators time and money, with no need to install additional monitors in the cab.

MF screens make ISOBUS management possible thanks to the Universal Terminal (UT) and manage up to 96 sections via the Task Controller (TC-SC). They can record and export data in the standard farming formats, such as ISOXML and Shapefile (TC-BAS).

Most frequently used ISOBUS implements functions can be directly assigned to controls on the MF Multipad joystick (AUX-N). This greatly eases operation by providing fingertip control of the tractor and implement on the same lever.

Ultimate automation is provided by the advanced ISOBUS TIM – Tractor Implement Management – system. This automatically manages the tractor’s functions, such as the forward speed and hydraulic operations, according to the implement’s requirements.